Solutions to improve the quality of life
VAT Relief is available if you make a declaration in the Shopping Basket
Please allow 3 or 4 working days for dispatch of this product
This black Roger SF Touchscreen Mic version of the Phonak Roger Touchscreen Microphone is only for use with Roger Digimaster soundfield systems and Roger Focus II receivers - the Roger SF Touchscreen Mic will not work with Roger X, Roger Integrated or Roger Direct receivers.
The black Roger SF Touchscreen Mic can be used in a multitalker network with Pass-around Mics, Multimedia Hubs & other Roger SF Touchscreen Mics.
With the advent of the Roger Touchscreen 3 transmitter, for cost reasons, we are now suggesting using the black Roger SF Touchscreen Mic in Digimaster Soundfield Systems where hearing aid users will not be present and for use with Roger Focus II systems where other hearing aid users are not involved with the Focus II user.
The general user menu functions of the black Roger SF Touchscreen Mic transmitter are similar to the regular Roger Touchscreen transmitter. It has intuitive indicator lights and a user-friendly interface. The SF Touchscreen Mic must be worn by the person speaking using the lanyard/neck cord as the SF Touchscreen Mic does not have the Touchscreen 3 pointing and small group microphone modes.
Phonak product code: 052-3482
Compatibility to Roger devices
Compatible with Roger Focus II Receivers & Roger
SoundField: Roger DigiMaster 5000, Roger DigiMaster 7000 , Roger
DigiMaster X (software version 4.x or higher)
Number of Roger SoundField in use in a network: 1x Roger DigiMaster 5000 or 2x Roger DigiMaster 7000 or 5x Roger DigiMaster X
Compatible Roger microphones: Roger SF Touchscreen Mic & Roger Pass-around
Number of Roger microphones in use in a Roger network: Up to 35
Compatible Roger hub: Roger Multimedia Hub
Microphones information
Number of microphones: 3 embedded microphones
Type: 3-array microphone
Mode: Lanyard
Usage information
Touchscreen: 6.1 cm (2.4’’) colour touchscreen. User
interface to activate/deactivate functions
Wearing option: Lanyard worn around neck
Lanyard : - Clip to easily clip or remove the device from the
lanyard
- Clip to adjust length and place the device 20cm (8’’) away
from the talker mouth
- Safety breakaway
Audio information
Audio input and output:
Wired (3.5mm jack)
Audio bandwidth: 100 Hz - 7.3 kHz
Roger information
Roger: Roger is the digital standard that bridges the
understanding gap, in noise and over distance, by wirelessly
transmitting the speaker’s voice directly to the listener
Transmission technology: 2.4 GHz including adaptive frequency
hopping
Power emission: 100 mW
Operating range to Roger receiver: 20 m (66 ft)
Operating range for Connect feature: 10 cm (4“)
Battery information
Battery: Lithium polymer 3.7 V DC
Charging time: Approx. 2 hours
Charging time depends on battery state
Capacity: 1200 mAh
Operating time: Approx. 10 hours
Remaining operating time is displayed in the status bar
Charging input: Input: 100 - 240 V
Output: 5 VDC/1A
Connector: Micro-USB
Cable length: 1.3 m (4.2 feet) (charging or
connection to computer for upgrade, service)
The battery cannot be over-charged. It may become warm during
charging
Important notice: It is recommended to only use the original
Phonak charging unit
Accessories available:
Charging rack (L x W x H: ): 188 x 75 x 28 mm (7.4” x 2.9” x
1.1”) 4-slots design to charge up to 4 devices together. It
accommodates Roger SF Touchscreen Mic, Roger Pass-around, Roger
Multimedia Hub, Roger Repeater
Ready-to-go bundle: Phonak Roger DigiMaster 5000v2 loudspeaker...
Ready-to-go bundle: Phonak Roger DigiMaster 5000v2 loudspeaker...
includes 1 Roger DigiMaster 5000v2, 6 Pass-around Mics, 1...
includes 1 Roger DigiMaster 5000v2, 6 Pass-around Mics, 1...