MED-EL Microphone Test Device and accessories kit for use
with MEDEL SONNET, SONNET 2 & SONNET 3 speech
processors.
A microphone test device (MTD) helps to determine whether the
microphone is providing an adequate signal. It allows you to carry
out a listening check of the processor. This kit includes
everything you need to use the MTD with the
Sonnet MED-EL CI processors. (It can also be
used with
OPUS 2 processors with the addition of a
DCM8082 lead, purchased
separately.)
Includes: the standard MTD, plus an adaptor lead for use with
SONNET processors, headphones & battery for MTD and
FineTuner.
The SONNET MTD adapter included in this kit enables wireless
transmission of the SONNET microphone signals via the attached
audio processor coil (D-coil and DL-Coil).
To use the MTD: Plug the MTD SONNET adaptor cable into the MTD.
Plug the accompanying earphones into the earphone jack of the MTD.
Remove the SONNET from the user's head and activate the
'monitoring' mode using the FineTuner. Turn on the MTD and place
the coil of the processor onto the flat side of the SONNET MTD
adaptor. Using the earphones, speak into the SONNET microphone and
listen to the quality of your voice. The MTD has a volume control
so that the sound level can be adjusted for the listener. If the
sound is scratchy or of poor quality, the microphone may need to be
cleaned or repaired. Contact MED-EL or the implant center for
repair or replacement options.
NOTE: If no signal is heard, push the Self-Test button on the
MTD. If the MTD is working properly, a beeping sound will be
present. The MTD features an LED that emits a green light if the
MTD battery is good and a red light if the battery is low.
The MTD uses 1 rechargeable or alkaline AA battery
(included).
Note: it is also possible to use a MTD with a RONDO but it
requires a Mini Battery Pack and connecting cables, purchased
separately.
Please note as a special order item this product is excluded
from the Connevans extended returns policy.
Supplied with Sonnet MTD adaptor, headphones, 1 x AA battery
& FineTuner.
Dimensions of the Microphone Tester
Length: 72mm
Width: 43mm
Height: 19mm
Weight: 42g (without battery)
Power supply
One primary or rechargeable size AA battery (1.2–1.5V)
Stereo connector
Standard 3.5mm stereo jack
Use commercial headphones with 8 to 32? (typically 16–24?) at
1kHz
Temperature range and humidity
Temperature range in operation: 10°C to 45°C
Temperature range for storage: –20°C to 60°C
Relative humidity range: 0% to 93% under 31°C, 0% to 90% from
31°C to 60°C
